StarTech.com Dual-Bay USB 3.0 to SATA and IDE Hard Drive Docking Station, USB Hard Drive Dock, External 2.53.5 SATA III and IDE (40 pin) SSDHDD Docking Station, Hot-Swap Hard Drive Bays - Top-Loading - storage controller - ATA / SATA 6Gb/s - USB 3.0

Product image of StarTech.com UNIDOCKU33
  • Product image of StarTech.com UNIDOCKU33 1

Pildid on illustratiivsed. Nendel kujutatud toode võib erineda pakutavast või sisaldada tootekomplekti mittekuuluvaid osiseid.

VendorStarTech.com
Product codeUNIDOCKU33
Price€91.00
Price (excl. VAT)€74.59
Delivery5-8 workdays
Quantity 5+  pcs
TransportFREE IN ESTONIA!
ESTO
Telia
LHV

ESTO financing calculator

NB! Järelmaks on finantskohustus,
millega kaasnevad kulud. Tutvu tingimustega siin.

Telia financing calculator

NB! Järelmaks on finantskohustus,
millega kaasnevad kulud. Tutvu tingimustega siin.

LHV financing calculator

NB! Järelmaks on finantskohustus,
millega kaasnevad kulud. Tutvu tingimustega siin.

Connect both an IDE and a SATA 2.5/3.5in hard drive or solid state drive to your computer system using an available USB 3.0 port, with support for UASP for optimal performance. The UNIDOCKU33 USB 3.0 Universal HDD / SSD Dock enables you to instantly access your 2.5 or 3.5in IDE and SATA hard drives through two top loading drive slots, saving you the hassle of mounting the drives into a computer or external enclosure or tray.
Enhanced with UASP (USB Attached SCSI Protocol), this hard drive docking station lets you get the most out of the fastest drive technologies such as SATA III (6 Gbps), solid state drives (SSD) and hybrid, drives with performance up to 70% faster than conventional USB 3.0 when paired with a UASP-enabled host controller. See our UASP testing results below for further details.
The slot-loading design holds the SATA and IDE drives upright inside the docks, neatly keeping them off the desk, for convenience and a clutter-free setup. For SATA drives, the HDD can be inserted and connected directly through the designated dock slot, while the IDE drive slot is conveniently positioned near the rear panel 40-pin data and LP4 power connections, making it easy to connect to the dock using the included IDE data and power cables.
A single USB 3.0 connection to your host computer, enables access to both the IDE & SATA hard drives simultaneously - a convenient solution for migrating data from an IDE drive to a SATA drive or vice versa. The dock can also be used to greatly increase  the storage and backup capabilities of your computer system with support for high capacity drives (tested with up to 6TB 3.5" and 2TB 2.5" drives).
The UNIDOCKU33 is backed by a StarTech.com 2-year warranty and free lifetime technical support.
Improved Performance with UASP
UASP is supported in Windows 8, Mac OSX (10.8 or above), and Linux. In testing, UASP performs with a 70% faster read speed and 40% faster write speed over traditional USB 3.0 at peak performance.
At the same peak in testing UASP also shows an 80% reduction in required processor resources.
Testing results were obtained using an Intel Ivy Bridge system, a UASP-enabled StarTech.com Enclosure, and a SATA III solid state drive.
Storage media type:
HDD, SSD
Storage drive interface:
Parallel ATA (IDE), Serial ATA, Serial ATA II, Serial ATA III
Storage drive sizes supported:
2.5,3.5"
Number of storage drives supported:
2
Maximum storage capacity:
6 TB
Host interface:
USB 3.2 Gen 1 (3.1 Gen 1) Type-B
USB 3.2 Gen 1 (3.1 Gen 1) ports quantity:
1
DC-in jack:
Yes
Maximum data transfer rate:
5 Gbit/s
Product colour:
Black
Material:
Plastic
Hot-swap:
Yes
Plug and Play:
Yes
RAID support:
No
LED indicators:
Activity, Power
Mean time between failures (MTBF):
30000 h
UASP support:
Yes
Chipset:
JMicron - JMS561U, JMD330
Certification:
CE, FCC
Built-in fan:
No
AC input voltage:
110-240 V
Input current:
1.3 A
Output voltage:
12 V
Output current:
3 A
Power plug type:
Type M
Width:
130 mm
Depth:
147 mm
Height:
70 mm
Weight:
500 g
AC adapter included:
Yes
Cables included:
USB
Manual:
Yes
Operating temperature (T-T):
5 - 80 °C
Storage temperature (T-T):
-40 - 70 °C
Operating relative humidity (H-H):
8 - 90%
Package width:
123 mm
Package depth:
187 mm
Package height:
214 mm
Package weight:
1 kg
Sustainability certificates:
RoHS
Harmonized System (HS) code:
84733080
Master (outer) case width:
210 mm
Master (outer) case length:
625 mm
Master (outer) case height:
450 mm
Products per master (outer) case:
10 pc(s)
© Icecat.biz

Send link to friend