ValueRAM's KVR32S22S8/16 is a 2G x 64-bit (16GB) DDR4-3200 CL22 SDRAM (Synchronous DRAM), 1Rx8, non-ECC, memory module, based on eight 2G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-3200 timing of 22-22-22 at 1.2V. This 260-pin DIMM uses gold contact fingers.

Power Supply: VDD = 1.2V Typical
VDDQ = 1.2V Typical
VPP = 2.5V Typical
VDDSPD = 2.2V to 3.6V
Nominal and dynamic on-die termination (ODT) for
data, strobe, and mask signals
Low-power auto self refresh (LPASR)
Data bus inversion (DBI) for data bus
On-die VREFDQ generation and calibration
Single-rank
On-board I2 serial presence-detect (SPD) EEPROM
16 internal banks; 4 groups of 4 banks each
Fixed burst chop (BC) of 4 and burst length (BL) of 8
via the mode register set (MRS)
Selectable BC4 or BL8 on-the-fly (OTF)
Fly-by topology
Terminated control command and address bus
PCB: Height 1.18” (30.00mm)
RoHS Compliant and Halogen-Free

Summary:

Kingston Technology ValueRAM . Component for: Laptop, Internal memory: 16 GB, Memory layout (modules x size): 1 x 16 GB, Internal memory type: DDR4, Memory form factor: 260-pin SO-DIMM, CAS latency: 22

Vendor Homepage:

https://www.kingston.com/en

Category Code:

MEB

Unit Box Height:

0.01

Unit Box Length:

0.08

Unit Box Width:

0.045

Buffered memory type:

Unregistered (unbuffered)

CAS latency:

Component for:

Laptop

Country of origin:

Taiwan

ECC:

Internal memory:

16 GB

Internal memory type:

DDR4

Memory data transfer rate:

3200 MT/s

Memory form factor:

260-pin SO-DIMM

Memory layout (modules x size):

1 x 16 GB

Height:

30 mm

Width:

69.6 mm

Harmonized System (HS) code:

84733020

Model:

KVR32S22S8/16

Units per Pallet:

Units per Shipping Box:

Unit Calculated Volume:

5.04E-05 cubm

Unit Calculated Weight:

0.018 kg

KIN NB MEMORY 16GB PC25600 DDR4/SO KVR32S22S8/16 KINGSTON

Ships quicker

Send link to friend